We use rechargeable battery for Swimmer. A normal charging process takes about 1-2 hours.
The red LED will turn ON when charging and will turn OFF when charging is complete.
When the battery is low, the red LED will flashes. Please charge the Speaker at this time.
It is recommended to make sure the Battery has been fully charged and fully released at the
beginning three times of use to ensure the battery the best long life performance.
Always use correct USB Cable to charge the Swimmer Speaker
After finished charging, please remove the cable from the Speaker Do not put the speaker in
charging state for a long time. This will shorten the lifetime of the battery.
Dot not install, place or use the Speaker near any source of heat such as a stove, radiator,
oven, toaster, coffee maker or other apparatus that gives off heat
Safety and General Information
Please read the following information before using this product
Users are not permitted to make changes or modify the product doing so will invalidate your
Warrantee.
1. To avoid electronic interference and/or compatible conflicts, TURN OFF the product in any
facilities where posted notices instruct you to do so. For example: Aircraft, Military Base,
Hospital or Health Care Facilities.
2. To avoid impairing your hearing in the long-term operation, keep the headset volume at a
moderate level.
3. Keep away of fire, and high voltage equipment
4. Follow the charging procedure described in this guide to charge the product.
5. Not suitable for use by very young children
Notice: When using the USB Charging cable or LINE-IN Cable keep the Swimmer away from
water as the connected devices may not be Waterproof and there will be a danger of
damage or Electric shock
To Next Page
Loading...