BOOM Swimmer - Description of Swimmer Functions; Music Playback Controls; Using the Line-IN Function

Menu and then choosing the option to select BOOM Swimmer that will be looking
for a device to connect with.
 The device will find the Bluetooth speaker, and ask if you are ready to connect , press
the OK or Confirm to connect.
 Note: Some Bluetooth devices may ask for a password or PIN. Enter 0000 and the
Speaker will be connected
Note: If the pairing is unsuccessful, please turn OFF the Swimmer Speaker and then ON
again and repeat the connection procedure.
Description of Swimmer Functions
Music Playback controls
 Short press Play/Pause Button to start/pause music
 Long press “VOL-” for 3 seconds to skip to the previous song.
 Long press “VOL+” for 3 seconds to skip to the next song.
 Short press “VOL+” button to increase the volume.
 Short press “VOL-” button to decrease the volume
Using the line-IN Function
1. Turn on the power.
2. Plug one end of the Line in cable into the 3.5mm jack, the other end into your audio
equipment.
3. Play and control the music from your audio equipment.
4. Bluetooth priority line in, it will play the line in audio if no bluetooth input
LED Indicator status information
Status
Indicator
Description
Turn on
Green light flashes
3 times quickly
Long press the ON/OFF button for 2 seconds
Turn off
Green light flashes
2 times quickly
Long press the ON/OFF button for 2 seconds
Bluetooth pairing
Blue lights flashes
quickly
Enters into pairing mode with an indication
tone “Pairing”
Bluetooth
connectivity/playback
Blue light flashes
every 7 seconds
Bluetooth not
connected
Blue light flashes
every 5 seconds
Low voltage alert
Red light flashes
with indication
tone