Need help?Do you have a question about the Boon FLAIR and is the answer not in the manual?
General| Weight Capacity | 50 lbs |
|---|---|
| Adjustable Height | Yes |
| Foldable | No |
| Tray Dishwasher Safe | Yes |
| Tray | Yes |
| Wheels | Yes |
| Seat Material | Foam |
| Harness Type | 5-point harness |
| Base Type | Pedestal base |
Prevent serious injury or death from falls or sliding out. Always secure child using harness system.
Adult assembly required. Product contains small parts and may have sharp points.
Includes seat, seat pad, shoulder straps, waist strap, buckles, crotch post.
Includes tubes, base, brake pedal, height adjustment button.
Includes tray, tray liner, and release handle.
Includes M6 and M4 bolts for assembly.
Secure support tube into base, rotate clockwise, and check for stability.
Align seat with brake pedal, secure with M6 bolts.
Align seat base cover with notch and attach with M4 bolts.
Raise or lower seat height by stepping on the front adjustment button.
Activate brake by pressing pedal down; press again to release.
Removable foam pad provides extra support for smaller children.
Secure child using waist, crotch, and shoulder harness system.
Press buckle center button and pull buckles outward to release harness.
Move shoulder straps to higher slots as child grows for proper fit.
Pull shoulder strap through slide adjuster to tighten or loosen.
Squeeze side button and pull strap to adjust waist strap length.
Align tray tabs with seat arm grooves and secure or release.
Remove tray liner by pulling tab; clean in dishwasher or by hand.
Follow steps to disassemble for transport or storage, removing seat and counterweight.
Clean seat, pads, straps, and tray with mild soap and water; avoid machine washing.
To Next Page
