Boost T80VHF-BT - Audio Operations and Connectivity; Music Recording and VOX Functionality; Bluetooth Wireless Connectivity; Rear Panel Interface and Controls

TO RECORD A MUSIC
1. To start record function, press the RECORD button.
2. Adjust level of the audio input you want to use
3. To stop record, press the RECORD button again.
TO USE VOX FUNCTION
When VOX function is enabled, the music level will decrease when
somebody talks into one of the microphones. The music level becomes
normal when the user stops talking into the microphone.
To activate this function, switch the VCV switch to on. If you want to
disable this function, set this switch to off position
BLUETOOTH FUNCTION
1. Switch on the Bluetooth function via power switch. The power LED will light
up
2. Switch on your Bluetooth Device
3. Press button until the LED (26) is flashing red and blue
4. Activate the Bluetooth connect function of your device
5. Select BLUETOOTH in the list of found devices
6. You are ready to play your music
REAR PANEL AND SPECIFICATIONS FOR BOOST80VHF-BT
1. USB SOCKET
2. SD CARD SOCKET
3. ECHO CONTROL
4. MIC LEVEL CONTROL
5. WIRELESS MIC LEVEL
CONTROL
6. RF LED
7. VOX FUNCTION SWITCH
8. MIC INPUTS
9. MP3 – IPOD INPUT
10. POWER SWITCH
11. MP3 – WMA – FM
PLAYER DISPLAY
12. USB / SD / BLUETOOTH /
LINE BOUTONS
13. BUTTONS
14. 2 BANDS TONE
CONTROL
15. MAIN LEVEL CONTROL
16. VHF RECEIVER POWER
LED
17. RECEIVER POWER
SWITCH
18. LINE INPUT
19. LINE OUT
20. POWER LED
21. CHARGE LED
22. FUSE
23. POWER SOCKET
SPECIFICATIONS
200W 8”/20cm portable sound system
Max power: 400W
SPL: 95dB
Frequency response: 50Hz – 20kHz
©Copyright LOTRONIC 2013 Page 5