Booster BDVM-8360UBT - AS (Auto Store); PS (Preset Scan); Band; MEM;PLAY;PAUSE; Mode

BDVM-8360UBT GENERAL OPERATION
General Operation
AS (Auto Store) / AS (Auto Store): In tuner mode, Press the AS/PS on the panel or
PS (Preset Scan) RPT/P.SCN button on the remote and hold for 2 seconds to store radio
station‟s with the best reception to the preset buttons automatically.
PS (Preset Scan): In tuner mode, press this button to scan the preset
memorized station, each preset scan for 5 seconds. Press again to stop
operation.
Band / Press the Band button to select your frequency band of choice in the
following sequence:
FM 1 → FM 2→ FM 3 → AM → FM 1 When a new frequency band is
selected, the last chosen frequency / station of that frequency band will
be heard.
In BT mode this button functions as the Call pick up button (see
Bluetooth Chapter).
MEM//PLAY/PAUSE/ In Radio mode,， see Program Preset Stations.
In Multimedia mode ( DVD, USB, SD), press it to start or pause the
playback. Press and hold the button for 2 seconds to stop the playback.
In Bluetooth mode: Hang up or Reject call. ( See Bluetooth Chapter).
Mode Press the Mode button to toggle between the available audio sources in
the following sequence: Radio →DISC→USB→ CARD→ Bluetooth
→AV IN →Radio. Selections only available if media is inserted.
DSP Press the DSP button to choose sound effect in the sequence of
FLAT→CLASSICS→POP→ROCK→DSP OFF
Menu Press the MENU button to enter into the settings mode. Press the MENU
to return to settings list.
In Radio mode, the MENU will display:
1) AUDIO => 2) EXPERT => 3) CLOCK
In AV IN/DVD/SD/USB mode, the MENU will display:
1) AUDIO => 2) PICTURE => 3) EXPERT => 4) CLOCK
AUDIO MENU
– 10 –
BASS
Support 10 levels. Default level is 0.
TREBLE
Support 10 levels. Default level is 0.
BALANCE
Support 10 levels for each left and right channel.
Default is left equal to right.
FADER
Support 10 levels for each front and rear
channel. Default is front equal to rear.
EQ DSP
OFF
FLAT→CLASSICS→POP→ROCK→DSP OFF