Booster TF64 - Product Parameters

Notice:
E. Product parameters
Packing list:
Main unit × 1; DC charger × 1; Instruction manual × 1
04
Product name﹕ Violent turbofan
Model﹕ TF64
Charging inteace﹕ DC
Rated input﹕ 16.8V
Operating temperature range﹕ 0℃~+40℃
Storage temperature range﹕ -20℃~+60℃
Charging time﹕ about 3 hours
Product size﹕ 270×110×72mm
Product weight﹕ about 820g
Please read this manual carefully before using the product and keep it in a safe place.
To avoid the risk of re, propey damage, and personal inju, be sure to follow the
following safety precautions:
1. Do not use with wet hands.
2. This product is prohibited from being exposed to splashing water or immersion in
water.
3. It is prohibited to block the air inlet and blowing outlet when the product is working.
4. It is prohibited to inse foreign objects into the air blower and air inlet.
5. It is prohibited to place this product near a heat source (stove or heater, etc.) or in a car
on a hot day.
6. Do not use near petroleum gas or other ammable products (such as volatile agents,
paint thinners, sprays, etc.), otherwise it may cause an explosion or re.
7. It is strictly prohibited to drop or collide, as it may cause damage and cause abnormal
operation. If it cannot be used normally, please contact after-sales seice in time.
8. Please do not pull, twist, squeeze or modify the charging cable with force. If the
charging cable is abnormally hot or damaged, please stop using the charging cable
immediately.
9. If the product produces abnormal noise, odor, high temperature, or abnormal fan blade
rotation, please stop using it immediately.
10. Please do not disassemble the entire product. If it is accidentally disassembled and
causes abnormal operation, please contact after-sales seice to send it back.