What to do if the control knob display of my BORA Hob indicates reed sensor defective?
If the control knob display on your BORA Hob indicates a reed sensor is defective, replace the reed sensor (PKA1NS) or replace the extraction electronics.
What to do if the limit switch is faulty or misaligned on my bora Professional 3.0?
If the control knob display on your BORA Hob indicates the limit switch is faulty or misaligned, contact the BORA Service Team.
What to do if my bora Professional 3.0 displays an error in the touch surface values?
If the control knob display on your BORA Hob shows an error in the touch surface values, remove the knob ring and put it back on, then repeat the touch command. If the issue continues, contact the BORA Service Team.
What to do if knob settings are incorrectly interpreted on my bora Professional 3.0?
If the control knob display on your BORA Hob shows knob settings are incorrectly interpreted and controls switch off after 4 to 8 seconds, replace the control knob.
What to do if fewer fans are operating than configured on my bora Professional 3.0?
If the control knob display on your BORA Hob indicates fewer fans are operating than configured, check the fan configuration in menu CA, check the fan connections on the control box, and replace the control box if necessary.
General| Product name | bora Professional 3.0 |
|---|---|
| Product category | Hob |
| Frequency | 50/60 Hz |
| Power control levels | 9 |
| Number of cooking zones | 4 |
| Type of cooking zones | Induction |
| Boost function | Yes |
| Residual heat indicator | Yes |
| Child safety lock | Yes |
| Timer | Yes |
| Power management | Yes |
| Dimensions (W x D x H) | 370 x 540 x 199 mm |
| Weight | 12 kg |
| Material surface | Glass-ceramic |
| Voltage | 220-240 V |
To Next Page
