6
ENSmart BBQ Thermometer / User Manual
Installing the batteries
2 AA size batteries are needed for this device. Make sure they
areput in the right direction by following the icons on the unit:
1. Press and slide the battery cover to open.
2. Put in batteries, according to the icons which show
directions.
3. Put back the battery cover.
Power ON/OFF
Press and hold the top button for more than 3 seconds when it is
in OFF mode, It will be powered on and the LCD display will show
'ON' with a beep sound, If you do the same when it is in ONmode,
it will be powered off.
When there is no probe inserted in the device, it will power off
automatically.
Explanation of displayed information
Probe Numbers
Battery Level
Current
Temperature
Target
Temperature
Temperature Unit
Wireless Connection
Alarm Signal
To Next Page
Loading...