34
ENBoretti Robusto / User guide - Installation advice
Step 8
The warming rack [nr.10] is made to slot into the two holes in the back of the BBQ.
Warming rack
Step 9
Fix the gas hose [nr.11] to the connection on the BBQ and on the other end to the
side burner as shown in image 12. Tighten the hose with a wrench and then perform
a leak test, as described in the following section. This is necessary before you can
start using the Robusto.
12
Side burner
gas hose
Hose gas regulator
Img.
To Next Page
Loading...
