BorMann Pro BAP7000 - Safety Instructions and Warnings; Understanding Safety Alert Symbols; Manual and Manufacturer Notes; Technical Data

EN
WWW.BORMANNTOOLS.COM
2
Safety instrucons
WARNING! Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.
RETURNS NOT ACCEPTED & WARRANTY VOID if Sprayer is not properly cleaned immediately aer use.
Clean Sprayer immediately to prevent permanent damage.
Save This Manual
Keep this manual for the safety warnings and precauons, assembly, operang, inspecon, maintenance and cleaning procedures. Write the product’s serial
number on the front page of the user’s manual (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry
place for future reference.
Important safety informaon
In this manual, on the labelling, and all other informaon provided with this product:
This is the safety alert symbol. It is used to alert you to potenal personal injury hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
DANGER indicates a hazardous situaon which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situaon which, if not avoided, could result in death or serious injury.
CAUTION, used with the safety alert symbol, indicates a hazardous situaon which, if not avoided, could result in minor or moderate injury.
NOTICE is used to address pracces not related to personal injury.
CAUTION, without the safety alert symbol, is used to address pracces not related to personal injury.
WARNING! Read all instrucons. Failure to follow all instrucons listed below m ay result in re, serious injury and/or DEATH. The warnings and precauons
discussed in this manual cannot cover all possible condions and situaons that may occur. It must be understood by the operator that common sense and
cauon are factors which cannot be built into this product, but must be supplied by the operator.
* The manufacturer reserves the right to make minor changes to product design
and technical specicaons without prior noce unless these changes signicantly
aect the performance and safety of the products. The parts described / illustrated
in the pages of the manual that you hold in your hands may also concern other
models of the manufacturer's product line with similar features and may not be
included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial,
trade or industrial applicaons. Our warranty will be voided if the machine is used
in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all
repair, inspecon, repair or replacement work, including maintenance and special
adjustments, must only be carried out by technicians of the authorized service de-
partment of the manufacturer.
Technical Data
Voltage/Frequency: 230V, 50Hz
Power 1010W
Max.volume ow 1.5L/min
Max spraying pressure: 3000psi
Biggest support nozzle: 415/515
Spray hose: 10m/Ø6.3*12.3"
WARNING! Read all safety warnings and instrucons. Failure to follow the warnings and instrucons may result in serious injury.
Save all warnings and instrucons f or future reference.
1. Work area safety
a. Keep work area clean and well lit. Cluered or dark areas invite accidents
b. Operate only in a well-venlated area. Paint thinners and solvents may be harmful if inhaled.
c. Do not operate the sprayer in explosive atmospheres, such as in the presence of ammable liquids, gases, or dust. The sprayer is able to create sparks result-
ing in the ignion of the dust or fumes.
d. Keep children and bystanders a way while operang a sprayer. Distracons can cause you to lose control.
2. Electrical safety
a. Sprayer plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with grounded sprayers.
Unmodied plugs and matching outlets will reduce risk of electric shock.
b. Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is
grounded.
c. Do not expose sprayers to rain or wet condions. Water entering a sprayer will increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the sprayer. Keep cord away from heat, oil, sharp edges or moving parts. Dam-
aged or entangled cords increase the risk of electric shock.
e. When operang a sprayer outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f. If operang a sprayer in a damp locaon is unavoidable, use a Ground Fault Circuit In interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of
electric shock.