Bornack RAILSTOP RS S06 - RAILSTOP RS S06 Brief Description and Intended Use

 | 
RAILSTOP RS S06
Guide type fall arrester
with a xed anchor line
INTENDED USE
The fall arrester RAILSTOP RS S in combina-
tion with a full body harness in compliance
with DIN EN  with a central fall arrester
D-ring at chest height (sternal) and also a
multifunctional D-ring at waist height
(ventral), only serves to secure one person
ascending or descending a ladder.
Users of this equipment must be familiar with
handling personal fall protective equipment
and the risks of working at heights.
The fall arrester RAILSTOP RS S may only be
used in combination with the tested rail guide.
It is only designed to secure persons and may
not be used to transport loads.
This PPE may only be used for vertical applica-
tions. The angle of inclination of the ladder may
be max. ° to .°.
• Max. number of users:  person per fall
arrester
• Max. user weight incl. clothing and equip-
ment . kg
• Min. user weight incl. clothing and equipment
. kg
• Application temperature - °C to + °C
All other uses are deemed improper. The
company BORNACK will not be liable for any
ensuing damages. The user bears the sole risk.
MATCHING CLIMBING SYSTEM COMPONENTS
RAILSTOP RS S
• Ladder types:
- LMB Tr, LMB Tr,
- LMB Tr CC, LMB Tr, CC
• Rail types:
- LMB arrester rail, C-profile
- LMB arrester rail, C-profileCC
• Rail attachments at a distance of . m or
ladder attachments at a distance of . m
• Rail end locks, rigid or releasable, both at top
and bottom
• Rail joint connector
• Removal flap
• Fall arrester RAILSTOP RS S
• Resting platform (hinged) on the ladder
• Roof exit with reinforcement spar
For more information, please refer to the
product information for the listed components.
There are separate assembly instructions
explaining how to assemble the various ladder
types. See pages / for information about
the ladder type identification.
Technical changes reserved
BRIEF DESCRIPTION