E-6
NOTE: To delete all MP3 music files on the USB thumb drive or SD Card, press pause during playback,
then press and hold the Play/Pause/Delete Button for several seconds until you hear a beep. This will
delete all MP3 music from the USB thumb drive or SD Card.
BLUETOOTH MODE
Pairing a Bluetooth Enabled Device for the First Time
NOTE: Refer to the user manual for your Bluetooth enabled device for instructions on pairing and connecting
Bluetooth devices.
1. Keep the turntable and your Bluetooth enabled device within 1 metre at all times during the pairing
process.
2. Make sure the Tone Arm is in its resting position and not in use. Turn the unit on by turning the Power
and Volume Knob. & you will hear an alert tone. If you have an USB thumb drive or SD Card inserted,
press the Mode Button repeatedly to cycle through the various functions until you hear an alert tone
for the Bluetooth function.
3. Turn on the Bluetooth function on your Bluetooth enabled device and search for Bluetooth devices.
When the search is complete, select “TB501” from the Bluetooth device list. (If a password is
required, use “0000” to finalize the pairing process.)
4. When the Bluetooth connection is successful, you will hear an alert tone and this means you are
connected and the speaker is ready for use.
NOTE:
• If pairing was unsuccessful, turn off the unit first and repeat the steps above to re-pair again.
• After successful pairing, paired devices will remember each other. Unless pairing information is
deleted, re-pairing is not required after the first time.
• If you want to pair the unit with other Bluetooth enabled devices, please disconnect the existing
device and pair with the new device according to the steps above.
5. Once you are successfully connected, adjust the volume and use the Play/Pause, Skip Forward and
Skip Backward buttons to control the music.
AUX-IN OPERATION
This turntable features an Aux-in (audio line in) Jack for connecting your smartphone, MP3 player or other
digital music player.
1. Connect an aux-in / audio line in cable (not included) from your external device to the Aux-in Jack located
on the back of the unit.
2. Turn the unit on by turning the Power and Volume Knob. The red Power Indicator Light will show the
turntable is on.
3. Start to play your music from the external audio device.
4. Adjust both Volume Controls on the turntable and on the external device to your desired level.
NOTE: Once an aux-in cable is plugged into the Aux-in Jack, the turntable will not play records or
music from a USB thumb drive or SD Card or play music via the Bluetooth Mode. To use any of the
other functions, you must unplug the aux-in / audio line in cable.
EARPHONE / HEADPHONE OPERATION
Whether you are listening to records or playing your music from the USB thumb drive, SD Card or the Aux-in
function, you may plug in earphones or headphones into the Earphone/Headphone Jack (3.5mm) for private
listening.
To Next Page
Loading...
