Borotto REAL 24 AUTOMATIC - 3 Identification Plate

Page 6 of 20 Rev 01
1
Cover
2
Inspection window
3
Control panel
4
Tray filling nozzles
5
Electrical cable
6
Automatic egg turning unit (accessory – may be supplied already installed according to the required model)
7
Egg tray element
8
Element joint rod
9
Bottom grate to be only used at hatching (last 3 days)
10
Digital display
11
Resistor on LED
12
Temperature control buttons
3 - Identification plate
The equipment is fitted with an identification plate showing the equipment's identification details and the main
technical specifications.
INCUBATRICI BOROTTO
Via Papa Giovanni Paolo II, 7/A
37060 Buttapietra (VR) Italy
MODEL REAL INCUBATOR
Year XXX Code RXX
Serial number XXXX
Weight XXXXX
Maximum power XXXX
Voltage 230 V 50/60 Hz IP 24
Made in Italy
11
12
10