4
Brushcutters
INTENDED USE
Before using our brush cutter, please read this manual
carefully to understand the proper use of your unit.
Keep this manual handy.
TECHNICAL SPECIFICATION
Model 2300 2300-Pro
Engine Type Air cooled
2-stroke petrol
Air cooled
2-stroke petrol
Rated Output Power, W 2300 2300
3
52 52
No-load speed, rpm 7000 7000
Fuel tank capacity, L 1,2 1,2
Gasoline/oil mixing ratio 25:1 25:1
3 3
Weight, kg 8,1 8,1
PRODUCT ELEMENTS 1
1 Handle
2 Shoulder Strap
3 Air cleaner
4 Blade
5 Clamp
6 Engine switch button
9 Throttle lever
12 Outer pipe
13 Safety guard
15 Fuel tank
16 Starter
SAFETY
Instructions contained in warnings within this
manual marked with a symbol concern critical
points which must be taken into consideration
to prevent possible serious bodily injury, and for this
reason you are requested to read all such instruc-
tions carefully and follow them without fail.
WARNING LABELS ON THE MACHINE
Read owner's manual before operating this
machine
Wear head, eye and ear protection.
Warning/Attention.
Keep children, bystanders and helpers
15 meters away from the brush cutter.
-
come soiled and impossible to read, you
should contact the dealer from which you
the new seal in the required location.
WARNING! Never remodel your brush cutter.
We won't warrant the machine, if you use the
remodeled brush cutter or you don't observe
the proper usage written in the manual.
SAFETY
Before using the machine
how to operate this unit properly.
grass, and it should never be used for any other pur-
pose.
-
-
iness as a result of having taken cold medicine, or
at any other time when a possibility exists that your
judgment might be impaired or that you might not
be able to operate the brush cutter properly and in a
safe manner.
-
es contain harmful carbon monoxide.
like those described below: When the ground is
slippery or when other conditions exist which might
make it not possible to maintain a steady posture
while using the brush cutter.
of strong or gale-force winds, or at any other times
when weather conditions might make it unsafe to
use this product.
-
ginning actual work, learn to handle the brush cutter
from skilled worker.
-
sults in lower attention spans, and this in turn leads
to accidents and injury. Limit the amount of time over
which the brush cutter is to be used continuously for
To Next Page
Loading...