The VOID shock that you’ve bought was designed and developed to fit most bikes on the market;
nevertheless you should refer to the tuning section of this manual to fit it perfectly to your bike, your
weight, and your riding style.
Your VOID shock is delivered with the correct mounting kits for the bike specified while ordering.
If you want to change or replace it please refer to the following plan:
Check the mounting direction
By referring to the compatibility table, available on the BOS MTB website download page.
Refer to the bike’s user manual
To follow your bike specific shock mounting procedure.
Never try to disassemble your shock. Limit yourself to the instructions given in this manual. This
shock is pressurized, for your own safety, do not try to open it. You also risk damaging the shock and
its internal mechanisms as well as voiding your warranty.
Contact an authorized service center for any maintenance operation.
To Next Page
Loading...
