How to stop smoke coming out of Bosca Firepoint 360?
To address smoke coming out of your Bosca Wood stove, ensure there's sufficient space for smoke evacuation, extending 60 cm over the roof. Properly reload the stove, keep the flue clean, and verify the baffle is correctly installed.
How to keep the glass clean on a Bosca Wood stove?
To prevent the glass of your Bosca Wood stove from getting dirty, use firewood with a low percentage of humidity and keep the Primary Air Control in the “intermediate” or “maximum” position.
What to do if my Bosca Firepoint 360 Wood stove doesn’t heat?
If your Bosca Wood stove isn’t heating, use firewood with a low percentage of humidity. Reload your stove over a good bed of live coals, and maintain the Primary Air Control in the “intermediate” or “maximum” position.
How to prevent stained flues in Bosca Wood stove?
To avoid stained flues in your Bosca Wood stove, use firewood with a low percentage of humidity. Also, do not overload your stove to prevent overheating.
Why is there visible smoke from my Bosca Firepoint 360?
If you see visible smoke from your Bosca Wood stove, use firewood with a low percentage of humidity. Note that smoke emissions are normal for the first few minutes of ignition, easing as the combustion chamber heats up (usually within 30 minutes).
Guidance on selecting an appropriate location for stove installation, considering air circulation and safety.
Instructions for installing the flue shield to meet minimum clearance requirements.
Details on the necessity and specifications for floor protectors for stove installation.
Guidance on correctly installing the flue system in compliance with standards.
Requirements for seismic restraint installation for Bosca stoves in New Zealand.
Guide to confirm the proper execution of the stove installation through a visual inspection diagram.
Explanation of how the double combustion system works to improve efficiency and reduce emissions.
Advice on selecting good quality fuel to maximize stove performance and efficiency.
Tips on identifying dry firewood by its physical characteristics before purchasing.
Method to test the dryness of firewood using cinders and observing its ignition behavior.
Step-by-step guide for easily lighting the stove using the provided system.
Instructions on how to add firewood and safely turn off the stove.
Overview of essential maintenance tasks to ensure proper stove functioning and safety.
Detailed steps for cleaning the stove's flue system to prevent creosote buildup and ensure draft.
Instructions for removing ash and keeping the stove's glass clean.
Definition, causes, and procedures for managing chimney fires and prevention.
Solutions for common problems like smoke, dirty glass, and poor heating.
Essential safety guidelines for operating and maintaining the stove.
Details on warranty coverage, duration, and conditions that void the warranty.
Procedure for lodging a warranty claim, including required documentation and access.
General| Brand | Bosca |
|---|---|
| Model | Firepoint 360 |
| Category | Wood stove |
| Language | English |
To Next Page
