20
28
20
7
14
7
Congratulations on purchasing a Bosca stove. By choosing one of our products you automatically
receive the support, guarantee and experience of our more than 20 years manufacturing stoves
equipped with double combustion systems that allow for an efficient use of firewood with a
minimum impact on the environment.
Bosca products are manufactured using only prime quality materials and the latest in design
and technology that, in the hands of our experienced workers, ensures our products meet the
highest international standards.
Additionally, our Pre- and After-Sales Services count with a highly qualified technical staff to help
you with all you need to install and service your stove.
What is the correct way to install my Bosca stove?
1.- We recommend you to use the Bosca Installation Kit to our stoves or stainless steel flue (AISI
439 in 0.5 mm thickness).
- 2 -
OWNER'S MANUAL
INTRODUCTION
INSTALLATION
To ensure the safe and proper functioning of your stove, it must be installed according to the
instructions included in this manual. We strongly recommend that your stove be installed by
an Authorized Technical Service.
In terms of safety, the flue is the most important component of your stove as it is the exhaust
for the gases produced by the combustion of firewood. These gases are extremely corrosive,
reach high temperatures and often contain fuel components. Studies have demonstrated that
fires related to stove or wood cookstoves usually originate near the flue.
We recommend you adhere strictly to the installation instructions detailed in this manual.
What is the most adequate location to install my Bosca stove?
In the case of a freestanding stove, it is essential to choose an adequate location for its installation.
The following are the main considerations you should take into account:
1. It is important that the stove be located in an area that allows for an adequate circulation of
air currents. This will enable the hot air to reach the different rooms of the house more easily.
Additionally, the stove must be located so that it is not an obstacle to the free circulation of
people, especially children.
2. Be especially careful if you must install the stove close to walls made of flammable material.
The same applies to curtains and carpets. The minimum installation distances are detailed below:
IMPORTANT
The junctures of the main flue are designed so that the
upper section fits into the lower one. In the case of a double
flue it is reversed; the lower section fits into the upper one.
DOUBLE FLUE
Diameter
10 inches
MAIN FLUE
Diameter
6 inches
Walls without protection
(cm)
Walls with protection
(cm)
To Next Page
Loading...