Bosch 06019A2101 - User Manual

To Next Page

Robert Bosch Power Tools GmbH

70538 Stuttgart

GERMANY

www.bosch-pt.com

1 609 92A 3A7 (2016.06) I / 280

GSR Mx2Drive

Professional

de Originalbetriebsanleitung

en Original instructions

fr Notice originale

es Manual original

pt Manual original

it Istruzioni originali

nl Oorspronkelijke

gebruiksaanwijzing

da Original brugsanvisning

sv Bruksanvisning i original

no Original driftsinstruks

fi Alkuperäiset ohjeet

el Πρωτότυπο οδηγιών χρήσης

tr Orijinal işletme talimatı

pl Instrukcja oryginalna

cs Původní návod k používání

sk Pôvodný návod na použitie

hu Eredeti használati utasítás

ru Оригинальное

руководство по

эксплуатации

uk Оригінальна інструкція

з експлуатації

kk Пайдалану нұсқаулығының

түпнұсқасы

ro Instrucţiuni originale

bg Оригинална инструкция

mk Оригинално упатство за

работа

sr Originalno uputstvo za rad

sl Izvirna navodila

hr Originalne upute za rad

et Algupärane kasutusjuhend

lv Instrukcijas oriģinālvalodā

lt Originali instrukcija

ςТЎϩХʉ ЌТϾϦφЍʉ ʌμВТЎϺυ

ΖЎϩʉ ˒μВЖЙʉʓ ИͳϞφЁʑ

OBJ_BUCH-1208-005.book Page 1 Monday, June 20, 2016 1:38 PM

Need help?

Do you have a question about the Bosch 06019A2101 and is the answer not in the manual?

The device manual describes the Bosch GSR Mx2Drive Professional Cordless Drill Driver, a versatile power tool designed for screwdriving and drilling in wood and plastic. The integrated light illuminates the immediate work area, but is not intended for household room illumination.

Function Description:

The GSR Mx2Drive is a cordless drill driver, indicated by the grey-marked handle area as the insulated gripping surface. It features right/left rotation, allowing for both drilling and screwdriving tasks. The tool offers two speed settings: a low speed for tasks requiring more torque and control, and a high speed for faster drilling or screwdriving. The "Switching On" and "Switching Off" symbols indicate how to operate the tool.

Important Technical Specifications:

The technical data for the GSR Mx2Drive Professional are detailed in the manual, including:

Rated Voltage (U): 3.6 V
No-load Speed (n0):
- 1st gear: 150 min⁻¹
- 2nd gear: 0 – 580 min⁻¹
Maximum Torque (M):
- According to ISO 5393: 10 Nm
- For metal: 5 Nm
- For wood: 5 Nm
Maximum Drilling Diameter (Ø): 5 mm
Maximum Screw Diameter (Ø): 5 mm
Tool Holder: 6.35 mm (¼")
Weight (according to EPTA-Procedure 01:2014): 0.53 kg
Noise/Vibration Information (according to EN 60745-2-1, EN 60745-2-2):
- Sound Power Level (LwA): 81 dB(A)
- Sound Pressure Level (LpA): 70 dB(A)
- Uncertainty (K): 3 dB
- Vibration Total Value (ah): <2.5 m/s²
- Uncertainty (K): 1.5 m/s²
Permitted Ambient Temperature:
- During charging (T1): 0...+45 °C
- During operation and storage (T2): -20...+50 °C (limited performance at temperatures <0 °C)
Recommended Batteries: GBA 3,6V... (Li-Ion)
Recommended Chargers: AL 1115 CV (3.6 – 10.8 V)

Usage Features:

The manual emphasizes several safety and operational features:

Personal Safety: Users are advised to stay alert, wear eye protection, and use personal protective equipment like dust masks and non-skid safety shoes. It's crucial to avoid unintentional starting by ensuring the tool is off before connecting the battery or picking it up. Maintaining proper footing and balance is also highlighted.
Electrical Safety: The tool's plug must match the outlet, and no modifications should be made. Users should avoid body contact with earthed surfaces and protect the tool from rain or wet conditions. For outdoor use, only suitable extension cords should be used, and a residual current device (RCD) is recommended in damp environments.
Battery Use and Care: Only chargers specified by the manufacturer should be used. The tool should only be operated with its designated battery packs. Unused batteries should be kept away from metal objects to prevent short-circuiting. In case of battery fluid leakage, contact should be avoided, and affected areas should be flushed with water, seeking medical help if eyes are affected. The battery is partially charged upon delivery and should be fully charged before first use.
Drilling and Screwdriving: The tool should only be applied to the screw when switched off to prevent slipping. Users should hold the machine firmly, especially during gear changes, as high reaction torque can occur. Workpieces should be secured with clamping devices.
Energy Saving: To conserve energy, the power tool should only be switched on when it is in use.

Maintenance Features:

Cleaning: The manual stresses the importance of keeping the power tool and its ventilation slots clean for safe and proper operation.
Service: Repairs should only be carried out by qualified specialists using original spare parts to ensure the safety of the power tool.
Battery Protection: The battery should be protected from heat, continuous intense sunlight, fire, water, and moisture to prevent explosion.
Dust Management: When dust extraction and collection devices are provided, ensure they are properly connected and used to reduce dust-related hazards.
Storage: Unused power tools should be stored out of reach of children.