To Next PageTo Next Page
Need help?Do you have a question about the Bosch 11234VSR and is the answer not in the manual?
General| Type | Hammer Drill |
|---|---|
| No Load RPM | 0-1, 100 |
| Chuck Type | Keyless |
| Chuck Size | 1/2 inch |
| Voltage | 120 V |
| No Load Speed | 0-1, 100 RPM |
| Power Type | Corded Electric |
Keep your work area clean and well lit. Avoid explosive atmospheres.
Double insulated tools. Check outlet voltage. Avoid grounded surfaces and wet conditions.
Stay alert, use common sense, dress properly, avoid accidental starting.
Secure workpiece, use safety equipment, keep handles dry.
Use insulated grip, wear ear protection, detect utilities, use side handle, avoid one-handed operation.
Respond to bit binding, avoid hammer striking, stop tool before setting down.
Use sharp accessories, remove bits safely, avoid carrying tool with spinning bit.
Warning about dust containing chemicals known to cause cancer, birth defects or other reproductive harm.
Explains the meaning of various symbols used on the tool and in the manual.
Diagram identifying key parts like handles, levers, switches, and ventilation openings.
Details the model number, shank style, and maximum capacities for bits.
Explains how to control tool speed using the trigger and preset dial.
Instructions for using the reversing switch lever to change bit rotation direction.
Describes the internal clutch that engages during overloading or bit binding.
Guidance on adjusting the auxiliary handle and setting the depth gauge for drilling.
Explains the function of the mode selector for drill-only or hammer-drill actions.
Steps for cleaning, greasing, and inserting SDS accessories into the tool holder.
Procedure for safely removing bits and accessories, including handling hot parts.
Tips to reduce tool wear and injury, including warm-up periods and break-in.
Techniques for drilling wood/plastic, metal, and masonry for optimal results.
Advice on professional service for internal components, bearings, and brush replacement.
Safe methods for cleaning the tool, ventilation openings, and lubrication guidance.
Recommendations for selecting appropriate extension cords based on tool rating and length.
Details the one-year limited warranty for portable and benchtop power tools, including exclusions.
