To Next PageTo Next Page
Need help?Do you have a question about the Bosch 11247 and is the answer not in the manual?
General| Voltage | 120V |
|---|---|
| Chuck Type | SDS-plus |
| No-load Speed | 0-900 RPM |
| Tool Holder | SDS-plus |
| Amperage | 7.5 A |
| Max Hole Diameter in Concrete | 1-1/8 inch |
| No Load RPM | 0-900 rpm |
| Max. Capacity in Steel | 1/2 inch |
| Operating Modes | Rotary Hammer |
| Drilling Diameter (Concrete) | 1-1/8 inch |
| Drilling Diameter (Steel) | 1/2 inch |
Maintain a clean, well-lit area and ensure electrical safety with proper connections and grounding.
Stay alert, use PPE, avoid distractions, and dress appropriately for safe operation.
Wear PPE, use auxiliary handles, and maintain firm grip for control and protection.
Avoid hidden hazards, keep cords clear of bits, and never strike jammed bits with hammers.
Use correctly sized extension cords and GFCI protection in damp locations for safety.
Be aware that dust from construction can contain carcinogens; use ventilation and approved masks.
Details how to install and remove accessories, including safety precautions for hot parts.
