To Next PageTo Next Page
Need help?Do you have a question about the Bosch 1250DEVS and is the answer not in the manual?
General| Power Source | Corded |
|---|---|
| Voltage | 230 V |
| Sanding Pad Size | 125 mm |
| Variable Speed | Yes |
| Dust Collection | Yes |
| Pad Type | Hook and Loop |
| Cable Length | 2.5 m |
| Dust Extraction | Yes |
| Orbit Diameter | 5 mm |
| Speed | 12000 OPM |
Information for consumers including contact details and website for support.
Guidelines for maintaining a safe and clean workspace to prevent accidents.
Instructions for safe use of electrical tools, including plug and cord safety.
Recommendations for operator safety, including dress code and situational awareness.
Specific safety precautions for operating orbital sanders, including dust management.
Overview of the tool's parts and their functions, illustrated with a diagram.
Technical specifications including model number, voltage, amperage, speed, and pad dimensions.
Instructions for installing and replacing the sander's backing pad.
Guide to attaching hook-and-loop sanding accessories to the backing pad.
Details on connecting the vacuum hose adapter for dust and chip extraction.
Instructions for attaching and using the side handle for better control.
How to turn the tool on, off, and lock the switch for continuous operation.
Explanation of the mode selector switch for adjusting material removal performance.
Details on the EFC system providing soft start and constant speed.
How to use the variable speed dial for adjusting the tool's operating speed.
Guide for selecting abrasives, backing pads, and switch settings for various materials.
Recommendations for effective sanding techniques, abrasive selection, and pressure.
Guidelines for polishing, including pad selection, compound use, and motion.
Warning about unauthorized service and recommendation for factory service.
Information on tool lubrication and recommended greasing intervals.
Guidance on examining and replacing carbon brushes for motor efficiency.
Recommendations for bearing replacement based on operating hours or noise.
Instructions for safely cleaning the tool, including warnings about solvents.
Advice on selecting appropriate extension cords based on tool rating and length.
