14 | English
1 609 92A 0C4 | (19.9.13) Bosch Power Tools
Use the battery only in conjunction with your Bosch
power tool. This measure alone protects the battery
against dangerous overload.
Use only original Bosch batteries with the voltage list-
ed on the nameplate of your power tool. When using oth-
er batteries, e.g. imitations, reconditioned batteries or
other brands, there is danger of injury as well as property
damage through exploding batteries.
The battery can be damaged by pointed objects such as
nails or screwdrivers or by force applied externally. An
internal short circuit can occur and the battery can burn,
smoke, explode or overheat.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for driving in and loosening screws
and bolts as well as for tightening and loosening nuts within
the respective range of dimension.
The light of this power tool is intended to illuminate the power
tool’s direct area of working operation and is not suitable for
household room illumination.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Tool holder
2 Locking sleeve
3 Carrying strap
4 Belt clip*
5 Battery pack*
6 Battery unlocking button*
7 Rotational direction switch
8 On/Off switch
9 “PowerLight”
10 Handle (insulated gripping surface)
11 Screwdriver bit with ball catch*
12 Universal bit holder*
13 Screwdriver bit*
14 Application tool (e. g. an impact socket)*
15 Carbon brushes
16 Cover lid
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Cordless Impact Screwdriver GDR 14,4 V-LI GDR 18 V-LI
Article number
3 601 JA1 4.. 3 601 JA1 3..
Rated voltage
V= 14.4 18
No-load speed
min
-1
0 –2800 0 –2800
Impact rate
min
-1
0 –3200 0 –3200
Maximum torque, hard screwdriving
application according to ISO 5393
Nm 150* 160*
Bolt size
mm M6 – M14 M6 – M14
Tool holder
¼" hexagon socket ¼" hexagon socket
Weight according to EPTA-Procedure
01/2003
kg 1.5/1.7* 1.6/1.8*
Cordless Impact Screwdriver GDS 14,4 V-LI GDS 18 V-LI
Article number
3 601 JA1 T.. 3 601 JA1 S..
Rated voltage
V= 14.4 18
No-load speed
min
-1
0–2800 0 –2800
Impact rate
min
-1
0–3200 0 –3200
Maximum torque, hard screwdriving
application according to ISO 5393 Nm 170* 180*
Bolt size
mm M6 – M16 M6 – M16
Tool holder
½" ½"
Weight according to EPTA-Procedure
01/2003 kg 1.5/1.7* 1.6/1.8*
OBJ_BUCH-832-005.book Page 14 Thursday, September 19, 2013 1:55 PM
To Next Page
Loading...
