To Next PageTo Next Page
Need help?Do you have a question about the Bosch AdvancedGrind 18 and is the answer not in the manual?
Read all safety warnings and instructions to avoid electric shock, fire, and serious injury.
Ensure proper grounding, avoid wet conditions, and use appropriate extension cords to prevent electric shock.
Maintain a clean, well-lit workspace and keep children and bystanders away from the operating area.
Stay alert, use protective equipment, and avoid distractions for safe operation of power tools.
Use the correct tool, maintain it properly, and disconnect power before adjustments to ensure safe operation.
Use specified chargers and batteries; handle with care to prevent injury, fire, or damage.
Have power tools serviced by qualified personnel using identical replacement parts to maintain safety.
Follow all warnings, use recommended accessories, and ensure proper speeds and guards for safe operation.
Understand kickback causes and take precautions like maintaining a firm grip and proper body positioning.
Use correct guards, wheel types, and flanges; mount wheels properly and ensure they are undamaged.
Use appropriate sanding disc sizes and follow manufacturer recommendations to prevent hazards.
Be aware of flying bristles and ensure guards do not interfere with wire brush operation.
Specifies the tool's purpose for cutting, grinding, roughing, and brushing metal materials without water.
Lists and illustrates key components and features of the angle grinder, referring to the diagram.
Provides essential technical specifications including article number, voltage, speed, and dimensions.
Details noise and vibration emission values measured according to EN standards.
Instructions on using correct chargers and fully charging the battery before first use.
Procedure for safely detaching the battery pack from the power tool.
Explanation of the LED indicators showing the battery charge level and status.
Instructions for correctly mounting and adjusting the protective guard for grinding.
Steps for fitting the protective guard specifically designed for cutting operations.
Instructions for fitting the extraction guard for cutting with a guide block.
Guidance on attaching and using the side handle for improved control.
Instructions for fitting the hand guard when using specific accessories like cup brushes.
Information on attaching and benefits of the low-vibration auxiliary handle for comfort.
Steps for securely fitting grinding or cutting discs using the quick-clamping nut.
Instructions for using flap discs, noting their longer service life and lower noise.
Procedure for fitting and using the rubber sanding pad with sanding sheets.
How to mount and use cup or disc brushes on the grinding spindle.
Information on using carbide grinding heads with a suitable protective guard.
Ensures that used abrasive tools match specified speeds and are undamaged.
Advice on managing dust and chips from various materials for health and safety.
Steps for inserting the battery and initiating the power tool's operation.
Procedure for correctly inserting the charged battery into the power tool.
How to start, stop, and lock the on/off switch for safe tool operation.
Explanation of the feature that prevents uncontrolled restart after power interruption.
Describes how Constant Electronic maintains consistent speed under load for uniform performance.
Details the electronic soft start function that limits torque and prolongs motor life.
How to use the thumbwheel to set the desired speed before or during operation.
Guidance on achieving optimal results for rough grinding, including angle and pressure.
Instructions for using flap discs, noting their longer service life and lower noise.
Advice on cutting metal safely, including using appropriate guards and feed rates.
Techniques and precautions for cutting stone, including dust extraction and using diamond discs.
Notes on observing regulations for slots in load-bearing walls during work.
Tips for protecting the battery from moisture, temperature, and ensuring its longevity.
Instructions for cleaning the tool and ventilation slots to ensure safe and efficient operation.
Information on contacting service for repairs, spare parts, and product use advice.
Specific declaration details for the Angle grinder product, including compliance statements.
General