To Next PageTo Next PageWhat to do if my Bosch AHS 35-15 LI blade will not move?
If the blade of your Bosch Trimmer will not move, it could be due to a discharged battery. In this case, recharge the battery. If that doesn't solve the problem, the garden product may be defective, and you should contact a service agent.
Why is my Bosch AHS 35-15 LI Trimmer cutting time per battery charge too low?
The cutting time per battery charge might be too low on your Bosch Trimmer due to several reasons: the blade may need cleaning, the battery might not be fully charged, or there might be too much friction due to a lack of lubricant. To resolve this, clean the blade, fully recharge the battery, and apply lubricant spray to reduce friction.
What to do if Bosch AHS 35-15 LI Trimmer motor runs but blades remain stationary?
If the motor of your Bosch Trimmer runs but the blades remain stationary, it indicates an internal fault. In this case, contact a service agent.
How to fix a Bosch AHS 35-15 LI Trimmer that does not operate?
If your Bosch Trimmer does not operate, it could be due to a discharged battery. Recharge the battery. Also, make sure that the safety switch is activated correctly according to the instructions in “Mounting and Operation”.
What to do if my Bosch AHS 35-15 LI blades are running slow or the anti blocking feature is not functioning?
If the blades of your Bosch Trimmer are running slow, or the anti-blocking feature isn't working, there are several possible causes. The battery may not be properly inserted, so ensure it is correctly placed. The battery contacts could be contaminated; try cleaning them by inserting and removing the battery several times, or consider replacing the battery. The battery might be defective or discharged, so recharge or replace it as needed. Finally, if the battery was stored outside its recommended temperature range, allow it to warm to room temperature.
Why is my Bosch AHS 35-15 LI Trimmer cutting blade hot?
A Bosch Trimmer's cutting blade can get hot for a few reasons. The blade might be blunt and need sharpening, or it could have dents that require inspection or overhaul. Another cause could be too much friction from a lack of lubricant; applying lubricant spray should help.
What to do if Bosch Trimmer operates intermittently?
If your Bosch Trimmer operates intermittently, it could be due to damaged internal wiring or a defective On/Off switch. In either case, contact a service agent.
Why is Bosch AHS 35-15 LI Trimmer battery charge indicator not lighting up properly?
If the battery charge indicator on your Bosch Trimmer is not lighting up properly, make sure the mains plug of the battery charger is fully inserted into the socket outlet. If it still doesn't light up, the socket outlet, mains cable, or battery charger might be defective. Check the mains voltage and have the battery charger checked by an authorized after-sales service agent for Bosch power tools.
Why does Bosch Trimmer have excessive vibrations or noise?
If your Bosch Trimmer is producing excessive vibrations or noise, it indicates that the garden product is defective. In this case, contact a service agent.
Keep work area clean, well lit, and free of clutter to prevent accidents.
Follow guidelines for plugs, grounding, wet conditions, and cord care to prevent electric shock.
Stay alert, use common sense, and avoid operating while tired or under the influence.
Instructions on how to properly insert the battery into the tool.
Guidance on how to start the hedge trimmer operation.
Procedures for maintaining the cutting blades for optimal performance.
Explains the steps for charging the battery, including temperature considerations.
Keep work area clean, well lit, and free of clutter to prevent accidents.
Follow guidelines for plugs, grounding, wet conditions, and cord care to prevent electric shock.
Stay alert, use common sense, and avoid operating while tired or under the influence.
Instructions on how to properly insert the battery into the tool.
Guidance on how to start the hedge trimmer operation.
Procedures for maintaining the cutting blades for optimal performance.
Explains the steps for charging the battery, including temperature considerations.
General| Power source | Battery |
|---|---|
| Battery voltage | 10.8 V |
| Blade size | 350 mm |
| Blade type | Single blade |
| Safety brake | Yes |
| Product color | Green |
| Blade tooth spacing | 15 mm |
| No-load stroke rate | 2400 spm |
Weight and Dimensions| Weight | 1.9 g |
|---|
