Getting to know your appliance en-us
17
Equipment bar
You can remove and adjust the equipment bar:
■ Lift equipment bar and remove.
Notes
■ Position the equipment bar in the middle of the
refrigerator compartment, between the top and
bottom shelves.
■ Insert the equipment bar carefully to avoid
scratching the appliance.
■ Check that the hooks are fully inserted and the
equipment bar is horizontal.
Note: You can remove the bin (hanging), the shelf
(hanging) and the bottle shelf (hanging) and move
them laterally.
Pull-out bin
You can remove the bin:
■ Pull out the bin all the way, lift at the front and
remove.
You can insert the bin:
■ Pull out the telescopic rails all the way.
■ Place the bin on the telescopic rails and push into
the appliance until it engages.
Fixed shelf
You can remove the shelf:
■ Open the bin, lift the shelf at the front and
remove.
To Next Page
Loading...
Need help?
General
