Cleaning and maintenance en-us
25
3. Pull out the fruit and vegetable container cover at the
rear and remove it .
Fitting the fruit and vegetable container cover
1. Slide the fruit and vegetable container cover symmetri-
cally backwards and clip into place .
2. Clip in one side of the fruit and vegetable container
cover at the front , then bend it downward slightly at
the middle , and then clip in the other side at the front
.
If the fruit and vegetable container cover is still bent,
move the humidity regulator to and fro until the fruit and
vegetable container cover clips into place.
To Next Page
Loading...
