28
Filter care
Figure
d) After fitting the foam filter, ins-
ert the filter cartridge into the
dust container.
e) Insert the filter cartridge into
the filter unit and lock it by tur-
ning the lid clockwise.
If, after hand-washing the filter
cartridge, the "Sensor Control"
indicator flashes red again, the
filter cartridge is so heavily soiled
that it must be washed in a
washing machine. Use a gentle
programme at max. 30 °C and the
lowest spin speed.
New filters can be obtained from
our after-sales service, if required.
20
20
d
e
To Next Page
Loading...
