29
en
Problem Cause Solution
The personally selected
dispensing slows to a trickle
or stops completely.
Adjust the grinding level to a
coarser setting. Use a coarser
the appliance.
Descale the appliance
according to the instructions,
see the section “Service
Hot water milky or tastes
removed.
milk container.
The grinding level is not
Adjust the grinding unit to a
The grinding level is too
coarse.
Adjust the grinding unit to
Adjust the grinding level to a
coarser setting. Use a coarser
high.
Reduce the temperature, see
Adjust the grinding level to a
coarser setting. Use a coarser
weak.
Raise the strength of the
drawer, clean and dry
thoroughly.
To Next Page
Loading...
