Bosch BDU490P - Page 143

Product description and
specifications
Intended use
The drive unit is intended exclusively for driving your
eBike and must not be used for any other purpose.
In addition to the functions shown here, changes to
software relating to troubleshooting and functional
enhancements may be introduced at any time.
Technical data
Drive unit Performance Line CX/
Cargo Line
Performance Line Speed/
Cargo Line Speed
Product code BDU480 CX BDU490P
Continuous rated power W 250 250
Torque at drive, max. Nm 75 75
Rated voltage V= 36 36
Operating temperature °F +23 to +104 +23 to +104
Storage temperature °F +14 to +122 +14 to +122
Protection rating IP 54 (dust- and
splash-proof)
IP 54 (dust- and
splash-proof)
Weight, approx. kg 3 3
The Bosch eBike system uses FreeRTOS (seehttp://www.freertos.org
).
Bicycle lights
A)
Voltage approx.
B)
V= 12
Maximum power
– Front light W 17.4
– Rear light W 0.6
A)
Depends on legal regulations, not possible in all country-specific models via the eBike battery
B)
When changing the bulbs, ensure that they are compatible with the Bosch eBike system (ask your bicycle dealer) and are suitable
for the specified voltage. Bulbs must only be replaced with bulbs of the same voltage.
Inserting a bulb incorrectly can cause it to blow.
English – 5
Bosch eBike Systems 0 275 U07 XD4 | (13.02.2019)
141