Installation instructions en
19
3.
Screw the middle screw tightly on the base of the
microwave.
4.
Loosen the two outer screws on the microwave
base.
5.
Secure the built-in frame on the microwave base
with the two outer screws.
6.
Secure the four supporting feet to the base of the
microwave.
12.10 Installing the appliance
1.
Secure the spacers to the appliance in accordance
with the wall thickness.
2.
Note:
Do not trap or kink the power cable.
Insert the appliance into the unit and move it to the
right.
3.
Screw the appliance in until the appliance is cent-
rally aligned.
To Next Page
Loading...
