23
Cleaning and care
Maintaining the dust separati-
on system
Your appliance is equipped with a
Sensor Control indicator. This
function constantly monitors
whether your vacuum cleaner is
working at its optimum power
level.
Fig.
20
20
In normal operation
Figure
The indicator (blue ring) flashes
red when the foam filter needs to
be cleaned. The appliance is
automatically adjusted to the
lowest power level.
20
21
Cleaning the foam filter
Switch off the appliance.
Figure
Open the lid of the foam filter by
pulling on the locking lever.
21
1
2
To Next Page
Loading...
Need help?
General
