How to fix temperature range issues on my Bosch Blaze GLM165-40?
If your Bosch Measuring Instruments tool is not within the temperature range between +14°F and 113°F (–10°C and +45°C), wait until the measuring tool has reached the operating temperature.
What to do if the battery low indicator is flashing on my Bosch Blaze GLM165-40 Measuring Instruments?
If the battery low indicator is flashing on your Bosch Measuring Instruments device and measurements are not possible, this indicates that the battery voltage is too low. Replace the batteries to resolve this issue.
Why does the battery low indicator appear on my Bosch Blaze GLM165-40?
When the battery low indicator appears on your Bosch Measuring Instruments, it means the battery voltage is decreasing, but measurement is still possible. To prevent interruption, replace the batteries soon.
What to do if all indicators are flashing on my Bosch Measuring Instruments device?
If all indicators on the display of your Bosch Measuring Instruments are flashing, this indicates that the measuring tool is defective. Contact the Customer Service.
What to do if the temperature warning indicator is flashing on my Bosch Measuring Instruments?
If the temperature warning indicator is flashing on your Bosch Measuring Instruments and measurement is not possible, wait until the measuring tool has reached the operating temperature.
General| Units of Measurement | Feet, Inches, Meters |
|---|---|
| Display | Backlit LCD |
| Battery Type | 2 x AAA batteries |
| Battery Life | Up to 10, 000 measurements |
| IP Rating | IP54 |
| Measuring Range | 165 ft |
| Accuracy | ±1/16 inch |
| Operating Temperature | 14°F to 122°F (-10°C to 50°C) |
| Laser Diode | 635 nm |
Explains safety alert, read manual, and warning symbols.
Provides general safety guidelines for tool operation and work area.
Guidelines for maintaining a safe and well-lit work environment.
Safety precautions related to battery handling and usage.
Safety measures for the user, including eye protection and awareness.
Guidelines for tool servicing and maintenance by qualified personnel.
Identifies and explains various icons and indicators on the tool's display.
Step-by-step instructions for battery installation and replacement.
Instructions for powering the measuring tool on and off.
Detailed steps for performing various types of measurements.
How to perform continuous distance measurements.
Steps for taking simple length measurements.
Procedures for calculating area, volume, and indirect distances.
Covers memory, adding/subtracting values, and changing units.
How to save, display, and delete stored measurements.
How to add or subtract measurements in real-time and length modes.
Steps to change the displayed unit of measurement.
Tips for optimal use, including influences on range and results.
Factors affecting the tool's measuring range and accuracy.
Policy for returning the product for refund or replacement within 30 days.
Explains safety alert, read manual, and warning symbols.
General safety guidelines for tool operation and radiation exposure.
Safety precautions related to battery handling and usage.
Identifies and explains various icons and indicators on the tool's display.
Step-by-step instructions for battery installation and replacement.
Initial setup and protection from moisture and sun.
Instructions for powering the measuring tool on and off.
Detailed steps for performing measurements using the laser tool.
Explains what happens when no measurement is shown on the screen.
How to pause and resume measurements, and manage displayed values.
Steps to change the displayed unit of measurement.
Factors affecting the tool's measuring range.
How surface types and conditions affect measurement accuracy.
Policy for returning the product for refund or replacement within 30 days.
To Next Page