To Next PageTo Next Page
Need help?Do you have a question about the Bosch BMS500-AAS036-1CSXRC and is the answer not in the manual?
General| Category | Air Conditioner |
|---|---|
| Cooling Capacity | 3.6 kW |
| Heating Capacity | 4.0 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Power Supply | 220-240V, 50Hz |
| Noise Level (Outdoor) | 52 dB(A) |
| Refrigerant | R32 |
| Power Consumption (Cooling) | 1.12 kW |
Provides crucial safety precautions and warnings before installation.
Explains the process of flaring pipe ends for a proper refrigerant connection.
Guides on connecting copper pipes to indoor and outdoor units.
Reminds to check for refrigerant leaks after installation.
Stresses electrical safety precautions and disconnecting power.
Detailed steps for wiring the outdoor unit, including cable selection and connection.
Reinforces safety for connecting indoor unit wires and grounding.
Advises connecting terminals with matching numbers for correct wiring.
Outlines steps and precautions before evacuating the refrigerant circuit.
Step-by-step guide on how to evacuate the refrigerant system using a vacuum pump.
Warns about proper refrigerant charging procedures and dangers.
Explains how to determine additional refrigerant needed based on pipe length.
Lists additional refrigerant charges based on model and pipe length.
First step in calculating estimated refrigerant charge based on standard pipe length.
Second step to calculate charge for each zone based on pipe length and diameter.
Third step to determine the final additional refrigerant amount required.
Instructions to perform refrigerant leak checks on all joints.
Provides detailed steps for performing the system test run for both indoor and outdoor units.
Critical warning about immediate actions if specific hazardous conditions occur.
Lists error codes displayed by the unit and their meanings.
