Need help?Do you have a question about the Bosch BMS500-AAS012-1CSXXA and is the answer not in the manual?
General| HSPF | 10 |
|---|---|
| Voltage | 208/230V |
| Refrigerant | R410A |
| Type | Split System |
| Cooling Capacity | 12, 000 BTU/h |
Explains symbols used in the document for warnings and important information.
Provides crucial safety precautions before installation and operation.
Provides torque specifications for tightening flare nuts during installation.
Specifies AWG wire sizes based on appliance amperage for proper cable selection.
Details pipe size requirements, standard length, max elevation, and refrigerant quantity.
Outlines the procedure for initial system setup and evacuation using a vacuum pump.
Explains how to add refrigerant to a system that already contains some.
Describes refrigerant recovery for indoor unit repair or re-installation.
Details the process for evacuating and recharging the system during outdoor unit repair.
Outlines key protective functions and their triggers for the unit.
Details the operational logic for different modes like fan, cooling, heating, and auto.
Explains how to enter and use the information enquiry mode for troubleshooting.
Lists error codes displayed on the indoor unit and their corresponding LED status.
Shows a diagram of the outdoor unit's PCB and connection points.
Provides troubleshooting steps for various error codes and malfunctions.
To Next Page