J
jrichardsonSep 14, 2025
What does fault code EC 54 mean on my Bosch CL3000i-Set 35 E?
- KKimberly FieldsSep 14, 2025
Fault code EC 54 on your Bosch Air Conditioner indicates a temperature sensor error at TP (compressor discharge pipe).
What does fault code EC 54 mean on my Bosch CL3000i-Set 35 E?
Fault code EC 54 on your Bosch Air Conditioner indicates a temperature sensor error at TP (compressor discharge pipe).
What to do if outdoor or indoor unit of my Bosch CL3000i-Set 35 E is not working?
If your Bosch Air Conditioner's outdoor or indoor unit isn't working, first check the power connection and power on the indoor unit. Also, check the RCD or fuse, as it might have tripped.
How to fix low output from Bosch CL3000i-Set 35 E indoor unit?
If the output of your Bosch Air Conditioner's indoor unit is too low, it could be due to a soiled heat exchanger in either the outdoor or indoor unit; clean it. Another cause might be a lack of refrigerant. In that case, check the tightness of the pipes and reseal if required, then refill the refrigerant.
Why does my Bosch CL3000i-Set 35 E Air Conditioner change from Cooling or Heating to Fan Mode?
If you notice your Bosch Air Conditioner automatically changing from Cooling or Heating to Fan Mode, this could be happening because the indoor unit is trying to prevent frost formation. Also, it is possible that the set temperature has been reached.
What does fault code EC 56 mean on my Bosch CL3000i-Set 35 E Air Conditioner?
Fault code EC 56 on your Bosch Air Conditioner indicates a temperature sensor error at T2B (outlet of evaporator coil; freely adjustable indoor units).
Why does my Bosch CL3000i-Set 35 E show fault code EL 0C?
Fault code EL 0C on your Bosch Air Conditioner indicates insufficient or escaping refrigerant or a temperature sensor error at T2.
What does fault code EH 03 mean on my Bosch CL3000i-Set 35 E?
Fault code EH 03 on your Bosch Air Conditioner indicates that the fan speed of the indoor unit is outside the normal range.
What does fault code PC 08 mean on my Bosch CL3000i-Set 35 E?
Fault code PC 08 on your Bosch Air Conditioner indicates protection against current overload.
Why is there an unpleasant odour coming from my Bosch CL3000i-Set 35 E?
If you are experiencing unpleasant odors during the operation of your Bosch Air Conditioner, it could be that unpleasant odors in the air are entering the units and spreading. Also, there may be mould on the air filter, so it should be cleaned.
Why is there white mist coming from my Bosch Air Conditioner indoor unit?
If you see white mist coming from your Bosch Air Conditioner's indoor unit, it may be due to a significant temperature difference between the indoor air and the air-conditioned air, especially in humid regions.
Brand | Bosch |
---|---|
Model | CL3000i-Set 35 E |
Category | Air Conditioner |
Language | English |