Bosch CMG633BS1B - MicroCombi

Microwave en
17
4.
Use the control ring to set the cooking time.
5.
Press ⁠ to start.
a The microwave starts and the cooking time counts
down. The heating line does not appear.
a When the time has elapsed, a signal sounds. The
time shown in the display is zero.
6.
When the cooking time has elapsed:
‒ To stop the signal early, press any touch field.
‒ If necessary, set a microwave power setting and
a cooking time again.
‒ When the food is ready, press ⁠ to switch the
appliance off.
7.
If you have switched off the drying function for the
microwave in the basic settings, dry the cooking
compartment.
→"Drying", Page21
Note:If you open the appliance door during operation,
the operation stops. When you close the appliance
door, you have to press ⁠ to continue. If you have
changed the basic setting, make sure that the mi-
crowave does not resume operation without food in-
side.
→"Basic settings", Page19
Changing the microwave power setting
If you change the microwave power setting, the cook-
ing time is reset.
1.
Press ⁠ to pause operation.
a The microwave power setting is highlighted in white.
2.
Use the control ring to change the microwave power
setting.
3.
Press ⁠ to continue operation.
Changing the cooking time
After the start of the microwave operation, you can
change the cooking time directly.
▶
Use the control ring to change the cooking time.
a The change is applied immediately.
11.3 MicroCombi
To reduce the cooking time, you can use some types
of heating in combination with microwave mode.
Possible combinations include:
¡ 90watts + 4Dhot air
¡ 90watts + Hot air grill
¡ 180watts + Hot air grill
¡ 360watts + Hot air grill
Setting MicroCombi
Note:
Note the correct way to handle the microwave:
¡ →"Safety", Page2
¡ →"Preventing material damage", Page6
¡ →"Microwave power settings", Page11
¡ →"Cookware and accessories with microwave",
Page15
1.
Press ⁠.
a The combination is highlighted in white.
2.
Turn the control ring to set the required combina-
tion.
3.
Press ⁠.
a The temperature is highlighted in white.
4.
Use the control ring to set the temperature.
5.
Press ⁠.
a The cooking time is highlighted in white.
6.
Use the control ring to set the cooking time.
7.
Press ⁠ to start.
a The appliance starts to heat and the cooking time
counts down.
a When the time has elapsed, a signal sounds. The
time shown in the display is zero.
8.
When the cooking time has elapsed:
‒ To stop the signal early, press any touch field.
‒ If necessary, set a combination again.
‒ When the food is ready, press ⁠ to switch the
appliance off.
Changing the temperature
Once the MicroCombi operation has started, you can
change the temperature directly.
▶
Use the control ring to change the temperature.
a The change is applied immediately.
Changing the cooking time
After the start of the MicroCombi operation, you can
change the cooking time at any time.
1.
Press ⁠.
2.
Use the control ring to change the cooking time.
a The change is applied immediately.
Changing the combination
If you change the combination of the type of heating
and the microwave power setting, all of the other set-
tings are reset.
1.
Press ⁠ to pause operation.
a The combination is highlighted in white.
2.
Use the control ring to change the combination.
3.
Press ⁠ to continue operation.