en Preventing material damage
12
▶ If the power cord of this appliance is damaged, it must be re-
placed by the manufacturer, the manufacturer's Customer Ser-
vice or a similarly qualified person in order to prevent any risk.
▶ Never immerse the appliance or the power cord in water or clean
in the dishwasher.
▶ Liquids must not be spilled on the appliance plug connection.
▶ Ventilate the appliance adequately.
▶ Never operate the appliance in a cupboard.
▶ Never place the appliance on or near hot surfaces.
▶ Never cover the warming plate.
▶ Never touch hot appliance parts.
▶ Allow hot appliance parts to cool down before touching.
▶ Only hold the jug by the handle.
▶ To avoid injuries, only use the appliance for its intended purpose.
▶ Follow the cleaning instructions.
▶ Clean surfaces which come in contact with food before each
use.
Preventing material damage
▶ Only use the appliance with fresh, cold,
non-carbonated water. Never add milk,
ready-made drinks or instant products.
▶ Never operate the appliance when
empty or overfilled. Observe the water
level indicator.
▶ Leave the appliance to cool down for at
least 5minutes after each use.
▶ Only place the jug in the appliance with
the lid closed.
▶ Do not remove the jug during the brew-
ing process.
▶ Only use the jug supplied.
Overview
→Fig.
1
Glass jug with lid
Drip stop
Water tank with water level indic-
ator
Cover for water tank, removable
Filter housing with filter holder,
swivelling and removable
Storage compartment for handle
Cord storage compartment
Warming plate
On/off button, illuminated
Preparing the appliance for
first use
Notes
¡ Perform the first cleaning process with a
mixture of 5cups of water and 1cup of
vinegar.
¡ Before each rinsing process switch off
the appliance using the on/off button
and leave it to cool down for 5minutes.
¡ Run the rinsing process twice using
6cups of water without adding vinegar.
→Fig.
2
-
8
To Next Page
Loading...
Need help?
General
