Bosch DWB98PR55 - Basic operation; Switching on the appliance; Switching off the appliance; Selecting a fan setting

en Familiarising yourself with your appliance
6
5 Familiarising yourself with your appliance
5.1 Control elements
You can use the controls to configure all functions of your appliance and to obtain information about the operating
status.
Switching the appliance on or off
Switching on fan setting1
Switching on fan setting2
Switching on fan setting3
Switching on intensive mode 1
Switching on intensive mode 2
Switching the fan run-on on or off
Switching automatic mode on or off
Resetting the filter saturation indicator
HomeConnect
Switching the lighting on or off
Setting the brightness
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Setting an operating mode
Your appliance is set to air extraction mode by default.
Note:When using it in circulating-air mode, you require
additional accessories.
▶
When using it in circulating-air mode, set the operat-
ing mode.
7 Basic operation
7.1 Switching on the appliance
▶
Press ⁠.
a The appliance starts at fan setting2.
7.2 Switching off the appliance
▶
Press ⁠.
7.3 Selecting a fan setting
▶
Press ⁠, ⁠or ⁠.
7.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
1.
Press to switch on the intensive setting 1.
2.
In order to switch on the intensive setting 2, press
⁠.
a After approx. 6 minutes, the appliance automatically
switches to fan setting 3.
7.5 Switching off intensive mode
▶
Press ⁠, ⁠or ⁠.
7.6 Switching on the fan run-on
During the fan run-on, the appliance continues to run
for a short time and then switches off automatically.
▶
Press
a The fan run-on starts at fan setting1.
a The appliance switches off automatically after ap-
prox. 10 minutes.
7.7 Switching off the fan run-on
▶
Press