Bosch e103022 - Materials Needed

5
Materials Needed
Hot Water Supply Line - Minimum
3/8” O.D. copper tubing, PEX, or
metal braided dishwasher supply line.
Electrical Supply Cable - Minimum #14
AWG, 2 conductor, 1 ground, insulated
copper conductors rated 75°C (167°F) or
higher.
Shut-off Valve and ttings appropriate
for hot water supply line (copper tubing/
compression tting, or braided hose).
90° elbow with 3/4” N.P.T. female
threads on one leg, and sized to t your
water supply line (copper tubing/com-
pression tting, or braided hose) on the
other leg.
UL listed conduit connector or strain
relief.