6 | English
u Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier to
control.
u Use the machine, accessories, ap-
plication tools, etc. according to
these instructions. Take the work-
ing conditions and the work to be
performed into account. Use of ma-
chines for operations different from
those intended could result in a haz-
ardous situation.
u Keep handles and grasping sur-
faces dry, clean and free from oil
and grease. Slippery handles and
grasping surfaces do not allow for
safe handling and control of the ma-
chine in unexpected situations.
Battery tool use and care
Remove the battery pack
– whenever the machine is left by
the user
– before clearing a blockage
– before checking, cleaning or work-
ing on the machine
– after striking a foreign object to in-
spect the machine for damage
– if the machine starts to vibrate ab-
normally, for immediately check
u Recharge only with the charger
specified by the manufacturer. A
charger that is suitable for one type
of battery pack may create a risk of
fire when used with another battery
pack.
u Use power tools only with specific-
ally designated battery packs.Use
of any other battery packs may cre-
ate a risk of injury and fire.
u When battery pack is not in use,
keep it away from other metal ob-
jects, like paper clips, coins, keys,
nails, screws or other small metal
objects, that can make a connec-
tion from one terminal to another.
Shorting the battery terminals to-
gether may cause burns or a fire.
u Under abusive conditions, liquid
may be ejected from the battery;
avoid contact. If contact accident-
ally occurs, flush with water. If li-
quid contacts eyes, additionally
seek medical help.Liquid ejected
from the battery may cause irritation
or burns.
u Do not use a battery pack or tool
that is damaged or modified. Dam-
aged or modified batteries may ex-
hibit unpredictable behaviour result-
ing in fire, explosion or risk of injury.
u Do not expose a battery pack or
tool to fire or excessive temperat-
ure. Exposure to fire or temperature
above 130°C may cause explosion.
u Follow all charging instructions
and do not charge the battery pack
or tool outside the temperature
range specified in the instruc-
tions.Charging improperly or at tem-
peratures outside the specified
range may damage the battery and
increase the risk of fire.
F 016 L81 963 | (12.04.2019) Bosch Power Tools
To Next Page
Loading...
