38
■ Open the washer-dryer door.
■ Remove the laundry.
² If a programme was interrupted at a high
temperature, such as drying programme, please
do not open the washer-dryer door until the
appliance has cooled down.
Pausing the
programme
If you would like to pause a runing programme without
changing the sequence:
■ Touch the Start/Pause P button during washing
cycle, the display shows H "PAUS"(pause), if door
open symbol }
flashes at this moment means the
door can be opened after 1 minute later, when the
}
symbol and "OPEn" come on, open the door if
required, add/remove the laundry, close the door.
■ To continue the programme .
Touch the Start/Pause P button again.
² The pause function cannot be activated during
drying cycle and water pressure detecting period. If
a programme was paused at a high water level or
temperature, the door open symbol does not
appear.
To Next Page
Loading...
