Bosch exxcel - Signal and volume settings; Adjusting acoustic signal volume

36
Signal The acoustic signal indicates:
– that the additional functions (buttons) have been
switched on or off.
– individual programmes statuses (e.g. start of
programme, end of programme), operating errors
and faults.
Start the signal mode
■ After setting, run the programme selector to “Off”,
the volume of signal is stored
* If required, set repeatedly.
1. Set to “Off”
2. 1 step to right
3. keep selected and
6. 1 step to right
6. button signals* 7. Information signals*
or
Set volume for...
4. 1 step to right
5. release and find the
number from 0 to 4