58
Built-under or built-in
appliance installation
The appliance must be built under or built in prior to
connecting the power supply.
The appliance can be built into or under a kitchen work
surface. For this purpose, a recess width of 60 cm is
required.
■ The washer-dryer must only be installed under a
one-piece worktop that is permanently attached to
the surrounding cabinets.
Attention
For safety reasons in built-under installation, a cover
plate* must be assembled by a specialist in place of
the appliance cover plate.
* Cover plate (set) can be obtained from a specialist
store or the Customer Service, order no.
WMZ 2420.
To Next Page
Loading...
