18 en | Accessories Conventional Automatic Fire Detectors
2021.03 | 11 | F.01U.004.377
User manual
Bosch Sicherheitssysteme GmbH
FAA‑420‑RI‑ROW
1. Wire the remote indicator as shown.
2. Place the cap on the base plate in such a way that the two hooks are inserted into the
slits.
3. Press the cap lightly onto the base plate until the snap‑fit‑hook engages.
FAA‑420‑RI‑DIN
Warning!
Malfunction and Damage
Note the maximum permitted current supply respectively the input voltage range of the
functional modes.
4 Wire the remote indicator as shown.
Mode Terminal connection Alarm condition
1
The remote indicator shows steady red light.
2
The remote indicator shows steady red light.
To Next Page
Loading...
