To Next PageTo Next Page
Need help?Do you have a question about the Bosch GMS 120 and is the answer not in the manual?
General| Maximum detection depth, ferrous metals | 120 mm |
|---|---|
| Maximum detection depth, non-ferrous metals | 80 mm |
| Maximum detection depth, copper conductors (live) | 50 mm |
| Maximum detection depth, wood | 38 mm |
| Calibration | Automatic |
| Automatic deactivation, approx. | 5 minutes |
| Protection Class | IP54 |
| Detectable materials | Ferrous metals, non-ferrous metals |
| Storage temperature | -20°C to +70°C |
| Operating Voltage | 9 V |
| Battery type | 9V block battery |
Provides an overview of the detector's purpose, features, and display elements.
Instructions on how to open the battery lid and insert the battery correctly.
Covers battery status indication and tool storage recommendations.
Guidelines for accurate scanning and avoiding interference.
Procedure for powering the detector on and off, and auto-off function.
How to control the display's backlight.
Method for enabling or disabling the audio feedback.
Describes how to move the tool over the surface for scanning.
Explains how to interpret signals and locate objects.
How to detect wood substructures and other dense materials.
Procedure for detecting ferrous and non-ferrous metals.
Instructions for detecting live electrical conductors.
Indicates when the tool is outside the operating temperature range.
Explains indicators for restarting detection or seeking service.
Instructions for manual recalibration if the detector shows false positives.
Guidelines for keeping the tool clean and in good working order.
Advice on environmentally friendly disposal of the product.
Information regarding compliance with FCC regulations for digital devices.
