Need help?Do you have a question about the Bosch Motion Detector and is the answer not in the manual?
General| Technology | Passive Infrared (PIR) |
|---|---|
| Tamper Protection | Yes |
| Detection Range | 12 meters |
| Wireless Communication | RF |
| Operating Temperature | -10°C to +55°C (14°F to 131°F) |
| Power Source | Battery or wired |
Follow steps: separate housing, add device via app, scan QR code for configuration.
Includes instructions for battery removal during non-use and notes on non-rechargeable batteries.
Verify that the Bosch Smart Home Controller and App are successfully set up prior to installation.
Instructions on how to separate the motion detector from its mounting bracket using a turn lock mechanism.
Guide to starting the Bosch Smart Home App, selecting 'Add device', and scanning the product's QR code.
Procedure for inserting the battery compartment, noting the LED indicator's orange flashing status.
Explains LED flash codes (green/red) indicating successful or failed configuration attempts.
Adheres to regulations, checks delivery integrity, and considers the installation location carefully.
Mount between 2.20-2.70m; product offers 90° detection at 12m, with optional sneak-by guard.
Avoid windows, direct sunlight, obstructions, moving objects, and sources of heat or cold.
Perform an app-based communication test to verify adequate signal strength before final mounting.
Punch holes in bracket, mark drill points, and mount with screws and plugs, minding electrical lines.
To Next Page