Need help?Do you have a question about the Bosch AVENAR detector 4000 and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | AVENAR detector 4000 |
| Category | Security Sensors |
| Language | English |
Lists standards and compliance for the AVENAR detector 4000 series.
Overview of AVENAR detector 4000 features, sensor integration, and communication.
Explains the functional principles of the optical, thermal, and chemical sensors.
Explains the scattered-light method used by the optical smoke detection sensor.
Details the thermal sensor's operation using a thermistor and analog-digital converter.
Describes the chemical sensor's function in detecting CO, H, and NO gases.
Explains the function and operation of the detector's two-color LED indicator.
Lists key features like self-monitoring, active adjustment, EMC resistance, and isolators.
Information on connecting AVENAR detector 4000 with various LSN fire panels.
Details various accessories including detector bases, sounders, indicators, and modules.
Describes detector base sounders for acoustic alarm signaling at the fire source.
Information on combined base sounder and visual alarm units for indoor use.
Details the use and mounting of remote indicators for hidden or inaccessible detectors.
Describes the different EOL modules (4-wire and 2-wire) for network termination.
Covers support plates, protective baskets, dust covers, and wall brackets.
Programming details for specific models, including default settings and location configurations.
Programming guidelines for these models, including installation locations.
Programming settings for these detectors based on installation location.
Programming of the FAH-425-T-R, including sensitivity categories and response times.
Instructions for mechanically mounting the detector base to surfaces or flush boxes.
General guidance for electrical connections, emphasizing short and insulated shield wires.
Wiring diagram and color codes for connecting MS 400/MS 400 B detector bases.
Specifies the maximum contact load for the FAA-MSR 420 detector base relay.
Step-by-step guide on how to attach and lock the detector head to the base.
Instructions for safely removing locked and unlocked detector heads from their bases.
Details on configuring detector addresses using rotary switches for manual or automatic settings.
Procedure for installing FAA-420-RI remote indicators, including wiring and base mounting.
Lists available AVENAR detector 4000 models with their designations and product IDs.
Catalog of detector bases, including standard, relay, and damp room seal options.
Details various detector accessories such as EOL modules and support plates.
Lists accessories for installation, like consoles and mounting brackets.
Catalog of addressable base sounders and combination sounder/visual alarms.
Lists remote indicator models for different applications.
Lists tools and consumables for detector testing, maintenance, and removal.
Provides a table outlining testing procedures for different AVENAR detector types.
Explains how to identify detector types using colored rings around the central display.
Details testing procedures for optical sensors, including revision mode and aerosol application.
Instructions for testing chemical (CO) and thermal sensors, including walktest modes.
Explains how to interpret diagnostic data like status, address, and analog values.
Details the warranty policy for defective detectors.
Procedure for handling defective detectors, recommending exchange.
Guidelines for the proper disposal of electrical and electronic devices and packaging.
Overview table summarizing features and capabilities of various AVENAR detector models.
To Next Page