Do you have a question about the Bosch DMF 10 Zoom and is the answer not in the manual?
Detection Angle | 90° |
---|---|
Mounting Height | 2.5m |
Tamper Protection | Yes |
Coverage Area | 10m |
Alarm Output | Relay |
Defines the measuring tool's purpose: detecting metals, joists, and live wires in walls.
Lists and details the numbered components of the DMF 10 Zoom measuring tool.
Explains the symbols and indicators on the device's screen for user interpretation.
Step-by-step guide for battery installation, removal, and understanding charge indicators.
Pre-operation checks, protection from environmental factors, and temperature adjustment.
Instructions for powering the device on/off and information on automatic shut-off.
How to enable or disable the audible signal tone for measurements.
Using the integrated pencil to mark detected object locations on the surface.
Understanding the calibration status and when recalibration or service is needed.
Guidance on cleaning the tool, manual calibration, and replacing parts.
List of available replacement parts for the DMF 10 Zoom, with part numbers.
Contact information and resources for technical support and service centers.