To Next PageTo Next PageWhy is my Bosch Security Sensors showing false metal detection?
False metal detection in your Bosch Security Sensors might occur if jewelry or a mechanical pencil are too close to the sensor area; in this case, remove jewelry and use a non-mechanical pencil. If this doesn't resolve the issue, recalibrate the detector.
What to do if my Bosch Security Sensors has difficulty detecting metal?
If your Bosch Security Sensors has trouble detecting metal, it might be because the metal objects are too deep. In this case, use the ZOOM feature. Alternatively, try scanning in both vertical and horizontal directions.
General| Brand | Bosch |
|---|---|
| Model | Multi-Detector DMD4 |
| Category | Security Sensors |
| Language | English |
Crucial safety advice before operating the multi-detector, including warnings about interference and safe practices.
Defines the purpose, features, and display elements of the multi-detector.
Lists key technical specifications, including scanning depth, operating conditions, and weight.
Instructions for battery installation, replacement, and indicators for battery status.
Step-by-step guide for powering the multi-detector on and off.
Guidelines for accurate scanning and procedures for marking detected objects.
How to enable or disable the audio signal tone during operation.
Instructions for performing preliminary and precision scans to detect metal objects.
How the detector differentiates between magnetic and non-magnetic metal types.
Detailed instructions on how to scan for wood substructures using the device.
Tips for differentiating detected wood objects from metal objects during scanning.
Explains how various surface materials affect detection accuracy.
How to detect live AC wires/conductors and factors affecting their detection.
Solutions for common problems encountered during metal scanning.
Solutions for common issues faced when scanning for wood objects.
Addresses issues related to detecting electrical wiring and potential causes.
Procedures for recalibrating the device and guidelines for its maintenance and cleaning.
Explains the meaning of the AutoCal indicator and when recalibration is needed.
Lists the part numbers for available replacement components for the multi-detector.
Recommends environmentally friendly disposal methods for the device and accessories.
Details FCC regulations and user guidance regarding potential radio frequency interference.
Outlines the limited warranty terms for portable and benchtop power tools in the specified regions.
