36 en | Maintenance and Service AVENAR detector 4000
2023-06 | 07 | F.01U.283.550
User manual
Bosch Sicherheitssysteme GmbH
– The EMC value indicates the EMC level. The current EMC value (short-term
measurement) is used during or right after the installation of the detector. The average
EMC value (long-term measurement) is used during the operation of the detector.
Current EMC value Average EMC value Description
0 - 8 0 - 49 Low EMC level. No action
required.
9 - 20 50 - 79 Medium EMC level. Consider
location.
>20 80 - 100 High EMC level. No suitable
location.
7.4 Warranty
Defective detectors are exchanged free of charge in the case of a claim under the warranty.
7.5 Repair
In the event of a defect, exchange the entire detector.
7.6 Disposal
Unusable electrical and electronic devices or modules must not be disposed of
with normal household refuse. They must be disposed of in compliance with
the applicable regulations and directives (e.g. WEEE in Europe).
Packaging film for the FAP-425-DOTC-R and FAP-425-DOTCO-R
The packaging bag used for multisensor detectors with C sensor consists of tear-resistant PE-
ALU laminated film and may be disposed of with the household refuse.
Defective detectors are exchanged and should be disposed of in accordance with legal
regulations.
To Next Page
Loading...
